

-20 %


POLYACRYLGEL - GLITTER COVER CAMOUFLAGE - UV/LED - 50ml
- Stock: In Stock
- Code: PRO-AGT-50
19.99€
24.95€
Ex Tax: 19.99€
POLYACRYLGEL - GLITTER COVER CAMOUFLAGE - UV/LED - 50ml
POLYACRYLGEL - GLITTER COVER CAMOUFLAGE - UV/LED - 50ml
The PolyAcrylGel Glitter has a salmon pink color enriched with silver glitter.
It is a camouflage cover that is extremely stable in color even after curing in a lamp.
Poly-Acrylgel is a new professional nail reconstruction system that will allow you to create covers and extensions on your nails, in a simple and lasting way.
To support the gel and acrylic systems today there is a new product namely the PolyAcrylGel which combines the best properties of the gel system and the acrylic system. A revolutionary product resistant and workable like acrylic and flexible and dense like gel (Strong & Flex)
The product is very dense and compact and what distinguishes it from any other product is its very high viscosity which allows it to be worked easily both in winter and in summer, without dripping or developing heat.
Why is PolyAcrygel different from the acrylic system?
Here because:
it does not emit odors
no monomer is needed
you don't have to mix it
does not air dry
20% lighter
more flexible
Why is it different from the gel system?
Here because:
it doesn't run
does not develop heat
does not lose consistency
does not lose adhesion
is 15% lighter
it is more stable
The Strengths of POLYACRYLGEL:
- high consistency and viscosity
- does not run
- does not burn
- does not lose grip
- does not lift
- does not crack
- excellent for coverings, reconstructions and nail biting treatments
- easily filed
- generates more compact powders
- does not contain VOC or volatile organic compounds
- odorless
- release dispersion
- dry in a lamp
- is flexible
- it is safe as it is acid-free
- no monomer needed
- easy to use
- light
- don't crack
- extreme hold
RECOMMENDATIONS FOR USE
The PolyAcrylGel requires a few steps:
excellent preparation of the natural nail
acid free primer and bonder
Base-Pro or Biotin-Base
a metal spatula to remove the product from the jar
a brush with synthetic bristles, with a cat's tongue or straight cut waistcoat
cleaner where to wet the tip of the brush
LET'S GO TO PRACTICE
After having optimally prepared the natural nail with a 100/180 grit file, proceed with the application of the Primer-Pro and Bonder-Pro promoters and subsequently, proceed with the drafting of a veil of Base-Pro or Biotin-Base.
Take a quantity of product equal to the length of the nail with the help of a metal spatula and unload the material at the height of the cuticles. Wet the brush in the special cleaner (dab it a bit on the pad) and proceed by pushing the product with the tip of the brush towards the cuticles, with a fan movement.
Then dab the product with the body of the brush, squeezing it a bit at the same time pulling it towards the tip. Rewet the brush from time to time. Arrange the shape you want to make, also modeling the sides of the nail with the brush.
Polymerizes in UV lamp for 120 seconds, in BaseLed lamp for 60 seconds. Proceed with a second coverage if necessary.
The product generates little dispersion and therefore before proceeding with filing, I advise you to degrease. Filing this product is very easy and generates a coarser dust than usual so it can be collected more easily and will not spread into the air. After filing, pass the buffer to smooth the surface and proceed with the drafting of your color gel or colored semi-permanent. Seal your work to preserve structure and color.
In the case of reconstruction with a map, proceed normally with the positioning of the map and the creation of the structure. Pay close attention to cover well the sides and the corners between the form and the natural nail.
Recommended curing times:
- UV lamp 120 seconds
- LED lamp 90 seconds