Menu
Your Cart
SIAMO OPERATIVI AL 100% E LE CONSEGNE SONO GARANTITE

Easy Builder Base Soak Off - 15 ML

Easy Builder Base Soak Off - 15 ML
Best seller -34 %
Easy Builder Base Soak Off - 15 ML
  • Stock: In Stock
  • Model: FGSO-00
9.90€
14.90€
Ex Tax: 9.90€
Ask Info Add to Cart

Easy Builder Base Soak Off - 15 ML

A new generation of semigel building that allows you to create micro-stretches of free margin during treatment with semi-permanent enamels. For those who want to stretch a few millimeters to the natural nail or for all those cases where the nail is squeezed in a corner, or to improve the surface not always homogeneous or simply to better define the free margin that is often jagged and asymmetrical.

All these qualities are contained in a soak-off building: Base Soak-off Easy-Builder.

The product comes in a convenient flask which thanks to its brush allows the correct dosage of the material.

Let's go to practice

  • Micro-stretching of the free margin: Prepare the nail as usual, then file the nail surface, paying attention not to sand deeply and continue to slit the free edge. Do not lay it off completely since you will need some free margin to insert the nail-form, on the site you will find various sizes and sizes. Position the map well and place the preparator (nail prep - acid primer and non acid if needed). Help with the Base Soak off Easy-Builder flask brush, to pick up the right amount of product that will be placed between the nail-form and the natural nail. Be careful to cover the whole nail but without stretching the gel on the cuticle. In this case, reshape the edges with orange sticks; Work the product evenly and without creating steps. Cure in UV lamp for 120 seconds or in 60 seconds in CCFL or if you prefer 60 seconds in LED lamp. The times change depending on the amount of product you have used and the length of the recreation. Without degreasing, proceed to reinsert the product and insert it into the lamp. After curing, proceed to degrease the product and remove the nail form. Now you can easily squeeze the free edge rebuilt and delicately from the desired shape. Remove excess filing powder and work out your favorite semipermanent color. Seal with our Top Soak Offs such as Twin Coat or Quick Top without dispersion. Remember that Easy-Builder is a semipermanent and does not originate to recreate important lengths but micro-stretches of up to 2 millimeters.

  • Stained fingernail: The procedure described for the microstructure building is also valid in the case of a sneezed nail, but in this case do not completely cover the length of the natural nail as you need to position the nail-form under the nail . Place the product in the groove and intact on the nail and proceed to polymerize in the lamp. Repeat the drawing process to improve the appearance of the nail. Limit excess product and system nail shape. Dust the excess of dust and proceed to the next steps of color rendering and sealing.

  • Define better the free surface or margin: you have often found yourself in front of uneven nails or with jagged edges. In the case of an irregular surface with any slight adherence or in the presence of striped nails, it creates a soft micro-bumper to fill the burrs. I invite you to check your nails well before handling it with Base Soak off Easy-Builder because the product is not designed as a palliative doctor, it does not solve any of the most serious and obvious problems of "naughty nails". Consult your doctor every time your nail has abnormal and abnormal color imperfections. In the case of nails with a free jagged or asymmetric edge, just be careful to seal the tip well when the product is being drawn. Proceed as in the other cases described above.

This product is very durable and is born just to last over time, in this regard, Easy Builder is comparable to the gel for flexibility and strength. For this reason, it is good to know that removal is performed more quickly with the file or a fine grain tip. If you use classic removal methods, ie Remover Liquid, there are some tips.

Removal with liquid

I always recommend that you sand or buffer a little the surface of the Top Sealer to facilitate the removal of the semipermanent with our Remover. Then use the classic method of soak off nail wraps soaked with liquid remover and wait for at least 10 minutes. Help with an orange platter on the flat side to gently remove the base that will easily leap. Remove everything by using a buffer / file and an orange stick. Repeat this if necessary.

Finish slightly the surface with 180 grit or superior file or 180 grit white buffer. Dip the nail into the Remover with Lanolin. After 8-10 minutes, remove the fingers from the pan and slice the piece of discarded gel


Removal with liquid


I always recommend that you sand or buffer a little the surface of the Top Sealer to facilitate the removal of the semipermanent with our Remover. Then use the classic method of soak off nail wraps soaked with liquid remover and wait for at least 10 minutes. Help with an orange platter on the flat side to gently remove the base that will easily leap. Remove everything by using a buffer / file and an orange stick. Repeat this if necessary.


Finish slightly the surface with 180 grit or superior file or 180 grit white buffer. Dip the nail into the Remover with Lanolin. After 8-10 minutes remove the fingers from the pan and drain the dissolved gel part. Be careful not to cut the natural nail; Repeat the operation (both immersion and filing) repeatedly until the gel is completely removed.


Recommended curing times

UV lamp 180 seconds

CCFL lamp 90 seconds

BaseLed Lamp All-in 60 Seconds

Made In Germany

Write a review

Please login or register to review
Clicca su questo link per visualizzare la scheda
Notification Module
This is the sticky Notification module. You can use it for any sticky messages such as cookie notices or special promotions, etc.